BZDXT - WS-500S ACCELERATOR

  • MSDS: BZDXT
  • Manufacturer: J AND R INDUSTRIES INC
  • Product Name: WS-500S ACCELERATOR
  • National Stock Number: 6850-00F048113
Product Identification

Product ID:WS-500S ACCELERATOR
MSDS Date:08/01/1994
FSC:6850
NIIN:00F048113
Kit Part:Y
MSDS Number: BZDXT

Responsible Party
J & R INDUSTRIES, INC
800 E. ANAHEIM STREET
WILMINGTON, CA 90744-5000
US

Emergency Phone: 310-476-7121

Info Phone: 310-830-9904

Preparer: DR R J MOUALIN

Cage: DO380

Contractor
J & R INDUSTRIES, INC
UNKNOW WILMINGTON, CA 90744

Telephone: 310-476-7121

Cage: JRIND

Ingredients

MANGANESE DIOXIDE, MANGANESE PEROXIDE *96-1*

CAS: 1313-13-9

RTECS: OP0350000

Fraction By Weight: 66%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE

First Aid

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER. SKIN: WASH W/SOAP &
WATER. INGESTION: INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point:NON FLAMMABLE
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:IN CLOSED AREAS WEAR SCBA EQUIPMENT.
Unusual Fire/Explosion Hazard:MAY OCCUR WHEN HEATED W/OXIDIZABLE
MATERIALS.

Accidental Release

Spill Release Procedures:SCOOP UP & TRANSFER TO CONTAINER. WASH SURFACE
W/SOAP & WATER.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE AWAY FROM
HEAT/OPEN FLAME.
Other Precautions:AVOID PROLONGED SKIN CONTACT.

Exposure Controls

Ventilation:MECHANICAL (GENERAL): FAN
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:PROTECTIVE EQUIPMENT
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.995
Evaporation Rate & Reference:(BU AC = 1): NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK PASTE
Percent Volatiles by Volume:NONE

Stability

Stability Indicator/Materials to Avoid:YES
COMBUSTIBLES, REDUCING AGENTS, HYDROGEN SULFIDE.
Stability Condition to Avoid:HEAT, OPEN FLAME
Hazardous Decomposition Products:CO2, CO, DUST
Conditions to Avoid Polymerization:HEAT, OPEN FLAME

Disposal

Waste Disposal Methods:REACT W/BASE & DISPOSE SOLID WASTE IAW/FEDERAL,
STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.